Konstrukcje na dach płaski (FR)

Ballast structure

Flat roof structures (FR)
FR-B-US-S/H/SA/MAX-LONG2100
Rodzaj konstrukcji
Uniwersalna (US)
Kierunek modułów
Południe (S)
Układ modułów
Poziom (H)
Sposób montażu
Krótki bok (SA)
Max długość modułu
2100
Type
Universal (US)
Module direction
South (S)
Module layout
Horizontal (H)
Installation
Short side (SA)
Max PV module length
2100
DESCRIPTION
Multi-part structure, made of Magnelis™ sheet metal, intended for flat roofs, where additional ballast is neccessary, without the possibility of using a welded structure.
Non-invasive assembly, using the appropriate number of ballast blocks, in accordance with the ballast plan.
Ready to be used for modules of various power and sizes, thanks to the use of two adjustable telescopic arms.
The system allows you to add weight to the base and simultaneously load the wind deflector with ballast (in roof areas particularly exposed to wind suction).
At the customer's request, each installation using a structure is calculated by our Technical Department in terms of its load for a given roof, the method of installation and the number of bases that must be mounted.
Installation requires a wind deflector, which limits the effect of wind on the structure and ensures its rigidity.
1
2
3
4
5
6
1
Upper telescope - short side
RBTSOLAR-KDPT_5_365
2
Lower telescope - short side
RBTSOLAR-KDPT_4_350
3
Upper telescope - long side
RBTSOLAR-KDT_3_825
4
Lower telescope - long side
RBTSOLAR-KDR_2_825
5
Omega for support (Base for ballast blocks)
RBTSOLAR-KDWZP_6_880
6
Base south
RBTSOLAR-KDPP_1_1560
CHARACTERISTICS
FR-B-US-S/H/SA/MAX-LONG2100
Roof type
Flat roof (FR)
Method of mounting the structure on the roof
Ballast (B)
Type of construction
Universal (US)
Module orientation
South (S)
Module layout
Horizontal (H)
How to install a PV module 1
Short side (SA)
Application/substrate on which it is mounted
PVC membrane/bituminous membrane
Method of assembly
The base of the structure is placed on the roof covering and then additionally ballasted using concrete blocks placed on a ballast platform
Does the structure require additional ballast?
Yes
Is it possible to apply the hybrid solution (weld + ballast)?
Yes - possibility of additional ballasting of the wind tower
Approximate weight of the structure per 1m2 of installation without additional ballast (kg/m2)2
6,40
Purlin length (mm)
Without purlins
Wind brace length (mm)
2175
Maximum PV module length (mm)3
2100
How to install the clamps
Clamps mounted to the triangle - key system
Method of distribution
Available in stock
FR-W-US-S/V/LAZ
Rodzaj dachu1
Dach płaski (FR)
Rodzaj dachu1
Dach płaski (FR)
MAX-LONG2100
MAX-LONG2300
MAX-LONG2500
Rodzaj dachu1
9,76
9,76
9,76
Rodzaj dachu1
9,76
9,76
9,76
1 the proposed installation method for a given type of module may differ from the installation method provided by the PV module manufacturer, whose recommendations and recommendations determine the proper installation
2 weight calculated for a system of three modules in one row with the maximum dimensions for a given type of structure
3 the given maximum size of the module and the proposed method of its installation may differ from the installation method provided by the PV module manufacturer, whose recommendations and recommendations determine the proper installation
LIST OF PARTS - BASE OF CONSTRUCTION
Universal triangle South
RBTSOLAR-FR-US-S
Omega for support (Base for ballast blocks)
RBTSOLAR-KD-PB
Self-locking nut M8 DIN985 A2
NSHM8A2
Round washer A2 8.4 DIN125A
PPM8A2
Allen screw M8X100 DIN912 A2
SIM8X100A2
LIST OF PARTS - OTHER INSTALLATION ELEMENTS
Sheet metal screw OC 5.5X25 EPDM
BLW55X25EPDMZ
End clamp 30/32/35/40 Nature/Black
KLK50/30(32/35/40)ALN
KLK50/30(32/35/40)ALCZ
Middle clamp 50 universal Nature/Black
KLSR50ALN
KLSR50ALCZ
Flange nut serrated M8 DIN6923 A2
NKM8A2
Allen screw M8X35 DIN912 A2
SIM8X35A2
Windchest South support L=2175/2355/2703mm
RBTSOLAR-KD-W-2175/2355/2703
Ballast wind shelter South support L=2175/2355/2703mm
RBTSOLAR-KD-WB-2175/2355/2703
Your selected template is empty.