Type
Individual (I)
Module direction
South (S)
Module layout
Vertical (V)
Installation
Long side (LA)
Mounting base
Sandwich panel, metal sheet (SP)
Description
A multi-part facade structure made of Magnelis™ sheet,
designed for facades constructed using sandwich panel or
trapezoidal sheet technology.
An invasive system composed of adjustable consoles, which
are mounted to the facade using screws of appropriate
length, and then to which profiles (on which PV modules,
previously equipped in neccessary mounts, are suspended)
are attached
A universal mounting system composed of adjustable,
telescopic elements, enabling the use of structures with
modules of various power and sizes.
A system designed for facades where the basis for the
construction choice is the impossibility of applying installa-
tion mounting on the roof or ground.
The structure has been designed to shorten the base
assembly and, at the same time, make the number of
mounting points to the facade as small as possible.
At the customer's request, each installation using a structure is calculated by our Technical Department in terms of its load on the facade, as well as the method and number of points that constitute the basis for the installation of
profiles, to which the modules are mounted
1
2
3
1
Mounting rail
2
Mounting clamp
3
Steel bracket/support
CHARACTERISTICS
FA-I-S/V/LA/SP
Destination
Facades (FA)
Type of construction
Individual (US)
Module orientation
South (S)
Module layout
Vertical (V)
How to install a PV module
Long side (LA)
Mounting base
Sandwich panel, metal sheet (SP)
Module type
Standard/Bifacial
Minimum number of PV modules
1
Standard clamps height (mm)
35
Standard clamps width (mm)
5
Maximum PV module length (mm)
-
Distribution
Individual order
LIST OF PARTS - BASE OF CONSTRUCTION
Self-locking nut
M8 DIN985 A2
NSHM8A2
Hexagonal nut
M10 IE
NM10Z
Washer M10 300HV
ISO7093-1 IE
PSZM10Z
Round washer
A2 8.4 DIN125A
PPM8A2
Hexagonal screw
M8X20 DIN933 A2
SM8X20A2
Hexagonal screw
M10X20 IE
SM10X20Z
Your selected template is empty.