Type
Individual (I)
Module direction
East-west (EW)
Module layout
Horizontal (H)
Supports no.
Three
No. / Max PV module length
3×3 + 3×3 (+6)
Description
A multipart ground structure made of Magnelis™ steel designed
for soil. Piled, without the need for additional ballasting.
Excellent for constructing installations above 50 kW, that require
building permits, and whose components need optimization due
to the specific location of the structure.
The mounting system is constructed from individually selected
structural elements, including beams, latches, and legs, allowing
for the use of the structure only for predetermined modules and
their sizes.
The screw system used for mounting beams, latches, and legs
does not require servicing, as long as the installation is carried
out according to the instructions.
Before production, it is necessary to provide a site development
plan, along with module installation instructions and
geotechnical conditions, including previous piling test results.
The system is designed for ground installations, where, due to
challenging geotechnical conditions (e.g., areas with dolomite),
it is necessary to use two-piece columns, including a lower
column with increased strength (CW profile) for piling in rocky
soils.
There is the possibility of applying a hybrid system, allowing for
the weighting of the leg/legs in places where it is not possible to
drill it/them to a specified depth
We recommend that each structure intended for production be previously calculated by our Technical
Department regarding its installation in a specific wind and snow zone, as well as based on geotechnical
conditions examined beforehand.
The structure is designed for wind and snow zones specified as W1S2, with piling not deeper than 1500.
To initiate production, no prepayment is required, unlike constructions produced for individual orders
![](https://rbtsolar.com/wp-content/uploads/2024/01/11-detal-1.jpg)
1
2
3
4
5
1
Latch
2
Purlin
3
Long leg/support
4
Strut
5
Short leg/support
CHARACTERISTICS
G-P-I-EW/H/3/3×3-3×3
Type of substrate
Ground (G)
Construction installation method
Piled structure (P)
Type of construction
Individual (I)
Module orientation
East-west (EW)
Module layout
Horizontal (H)
Number of columns
3
Number of PV modules
3×3 + 3×3 (+6)
Type of modules
Standard/Bifacial
Shape of the column
C-profile / CW-profile
Does the construction require additional ballast?
No
Is it possible to use a hybrid solution
(piling + ballast)?
Yes - possibility of additinal ballasting
Minimum number of modules on the structure
18
Height of standard clamps (mm)
35
Thickness of standard clamps (mm)
5
Maximum PV module size (mm)
-
Distribution method
Individual order
FR-W-US-S/V/LAZ
Rodzaj dachu1
Dach płaski (FR)
Rodzaj dachu1
Dach płaski (FR)
MAX-LONG2100
MAX-LONG2300
MAX-LONG2500
Rodzaj dachu1
9,76
9,76
9,76
Rodzaj dachu1
9,76
9,76
9,76
LIST OF PARTS - BASE OF CONSTRUCTION
![](https://rbtsolar.com/wp-content/uploads/2024/01/PEM-KLK50_30.jpg)
End clamp
35
Nature/Black
KLK50/35ALN
KLK50/35ALCZ
![](https://rbtsolar.com/wp-content/uploads/2024/01/PEM-KLSR50ALN.jpg)
Middle clamp
50 universal
Nature/Black
KLSR50ALN
KLSR50ALCZ
![](https://rbtsolar.com/wp-content/uploads/2024/01/PEM-NKM8A2.jpg)
Flange nut
serrated
M8 DIN6923 A2
NKM8A2
![](https://rbtsolar.com/wp-content/uploads/2024/01/EPK-NM10Z.jpg)
Hexagonal nut
M10 IE
NM10Z
![](https://rbtsolar.com/wp-content/uploads/2024/01/EPK-PSZM10Z.jpg)
Washer M10 300HV
ISO7093-1 IE
PSZM10Z
![](https://rbtsolar.com/wp-content/uploads/2024/01/EPK-SIM8X100A2.jpg)
Allen screw
M8X100 DIN912 A2
SIM8X100A2
![](https://rbtsolar.com/wp-content/uploads/2024/01/EPK-SM10X20Z.jpg)
Hexagonal screw
M10X20 IE
SM10X20Z
LIST OF PARTS - OTHER INSTALLATION ELEMENTS
![](https://rbtsolar.com/wp-content/uploads/2024/01/PEM-NOGA_DWUDZIELNA_CW.jpg)
Bipartite support leg
CW-profile
![](https://rbtsolar.com/wp-content/uploads/2024/01/PEM-ZASTRZAL_PRZOD-TYL.jpg)
Strut
Your selected template is empty.