Type
Universal (US)
Module direction
South (S)
Module layout
Vertical (V)
Installation
Long side (LA)
Mounting base
Concrete, ceramics, silicate (CCS)
Description
A multi-part facade structure made of aerated concrete,
ceramics or silicate and further insulated with wool or
polystyrene.
An invasive system composed of adjustable consoles, which
are mounted to the facade using screws of appropriate
length, and then to which profiles (on which PV modules,
previously equipped in neccessary mounts, are suspended)
are attached.
A universal mounting system composed of adjustable,
telescopic elements, enabling the use of structures with
modules of various power and sizes.
The structure has been designed to shorten the base
assembly and, at the same time, make the number of
mounting points to the facade as small as possible.
At the customer's request, each installation using a structure is calculated by our Technical Department in terms of its load on the facade, as well as the method and number of points that constitute the basis for the installation of
profiles, to which the modules are mounted
1
2
3
4
1
Adjustable wall console
2
Mounting strip for PV module
3
Mounting rail
4
Mounting angle
Characteristics
FA-US-S/V/LA/CCS
Destination
Facades (FA)
Type of construction
Universal (US)
Module orientation
South (S)
Module layout
Vertical (V)
How to install a PV module
Long side (LA)
Mounting base
Concrete, ceramics, silicate (CCS)
Module type
Standard/Bifacial
Minimum number of PV modules
1
Standard clamps height (mm)
35
Standard clamps width (mm)
5
Maximum PV module length (mm)
-
Distribution
Available in stock
LIST OF PARTS - BASE OF CONSTRUCTION
End clamp
35
Nature/Black
KLK50/35ALN
KLK50/35ALCZ
Middle clamp
50 universal
Nature/Black
KLSR50ALN
KLSR50ALCZ
Self-locking nut
M8 DIN985 A2
NSHM8A2
Hexagonal nut
M10 IE
NM10Z
Washer M10 300HV
ISO7093-1 IE
PSZM10Z
Allen screw
M8X100 DIN912 A2
SIM8X100A2
Hexagonal screw
M10X20 IE
SM10X20Z
Your selected template is empty.